MPC-Saddle supports

MPC-Saddle supports

galvanised

Display variants as list

Design:

cross double lengthwise

Type:

not pre-assembled pre-assambled

For profiles:

27/18, 28/30 38/24-40/60 38/24-40/60, 41/21-41/62 38/24-40/80 38/24-40/80, 41/21-41/62 38/80, 40/80 40/120

Field of application

Simple assembly of strong crossbeams using MPC-Support channels
Applicable for cramped installation conditions in shafts and ducts

Advantages

The vertical and horizontal holes in the base plate enable simple alignment of the MPC-Saddle support
Good load transfer due to the high bending stiffness of the saddle connection
Ideal connecting element for channel constructions
The section 38/80 provide torque-resistant support as channel is encompassed on both sides

Support channels:: for MPC-Profiles
Product type:: Connecting parts
Material:: Steel
Surface:: galvanised

MPC-Saddle supports, galvanised

	Product number	Design	Type	For profiles	Action
	156818	cross	not pre-assembled	27/18, 28/30	Pieces
	156816	cross	not pre-assembled	38/24-40/80, 41/21-41/62	Pieces
	156811	lengthwise	not pre-assembled	27/18, 28/30	Pieces
	156809	lengthwise	not pre-assembled	38/24-40/60, 41/21-41/62	Pieces
	156812	double	not pre-assembled	38/80, 40/80	Pieces
	156813	double	not pre-assembled	40/120	Pieces
	156817	cross	pre-assambled	38/24-40/80	Pieces
	156810	lengthwise	pre-assambled	38/24-40/60	Pieces